Note: Make Sure to have the SoniCloud Mobile app downloaded prior to starting implementation.
(Download the SoniCloud Mobile app HERE) or scan the QR CodeIf you are using a SoniLink device, please refer to the SoniLink Hub Quick-Start/Installation Guide before proceeding.
Getting Started -
- Using your connection cables, insert your Sonicu Sensors into the desired Inputs on the underside of your SoniShield Duo.
- Use the included power adapter and Micro USB cable to connect your SoniShield Duo to AC power.
- Using the included Reset Pin, Hold the On/Off Transmit Button (pictured above) down until the LED on the front-left side flashes green, then release the On/Off Transmit Button. The LED will start flashing in accordance with the SoniShield Duo's boot cycle.
If your device was preprogrammed by Sonicu, your device is now on and ready to set up!
4. To proceed with setting up your Sonicu Meter, please continue to SoniShield Duo Activation via SoniCloud Mobile Implementation Wizard.
For additional questions regarding the Sonishield Due Quick Start Guide please contact Sonicu Support for assistance. Sonicu Support can be reached by email at support@sonicu.com or by calling 317-468-2345. Sonicu Support is available M-F 8 am-5 PM EST.